|
Prusa MINI Firmware overview
|
Go to the source code of this file.
| #define RUMBA32_V1_0 |
Marlin 3D Printer Firmware Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
Based on Sprinter and grbl. Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program. If not, see http://www.gnu.org/licenses/.
| #define BOARD_INFO_NAME "RUMBA32" |
| #define DEFAULT_MACHINE_NAME BOARD_INFO_NAME |
| #define E2END 0xFFF |
| #define X_MIN_PIN PB12 |
| #define X_MAX_PIN PB13 |
| #define Y_MIN_PIN PB15 |
| #define Y_MAX_PIN PD8 |
| #define Z_MIN_PIN PD9 |
| #define Z_MAX_PIN PD10 |
| #define X_STEP_PIN PA0 |
| #define X_DIR_PIN PC15 |
| #define X_ENABLE_PIN PC11 |
| #define X_CS_PIN PC14 |
| #define Y_STEP_PIN PE5 |
| #define Y_DIR_PIN PE6 |
| #define Y_ENABLE_PIN PE3 |
| #define Y_CS_PIN PE4 |
| #define Z_STEP_PIN PE1 |
| #define Z_DIR_PIN PE2 |
| #define Z_ENABLE_PIN PB7 |
| #define Z_CS_PIN PE0 |
| #define E0_STEP_PIN PB5 |
| #define E0_DIR_PIN PB6 |
| #define E0_ENABLE_PIN PC12 |
| #define E0_CS_PIN PC13 |
| #define E1_STEP_PIN PD6 |
| #define E1_DIR_PIN PD7 |
| #define E1_ENABLE_PIN PD4 |
| #define E1_CS_PIN PD5 |
| #define E2_STEP_PIN PD2 |
| #define E2_DIR_PIN PD3 |
| #define E2_ENABLE_PIN PD0 |
| #define E2_CS_PIN PD1 |
| #define TEMP_0_PIN PC4 |
| #define TEMP_1_PIN PC3 |
| #define TEMP_2_PIN PC2 |
| #define TEMP_3_PIN PC1 |
| #define TEMP_BED_PIN PC0 |
| #define HEATER_0_PIN PC6 |
| #define HEATER_1_PIN PC7 |
| #define HEATER_2_PIN PC8 |
| #define HEATER_BED_PIN PA1 |
| #define FAN_PIN PC9 |
| #define FAN1_PIN PA8 |
| #define SCK_PIN PA5 |
| #define MISO_PIN PA6 |
| #define MOSI_PIN PA7 |
| #define LED_PIN PB14 |
| #define BTN_PIN PC10 |
| #define PS_ON_PIN PE11 |
| #define KILL_PIN PC5 |
| #define SDSS PA2 |
| #define SD_DETECT_PIN PB0 |
| #define BEEPER_PIN PE8 |
| #define LCD_PINS_RS PE10 |
| #define LCD_PINS_ENABLE PE9 |
| #define LCD_PINS_D4 PE12 |
| #define LCD_PINS_D5 PE13 |
| #define LCD_PINS_D6 PE14 |
| #define LCD_PINS_D7 PE15 |
| #define BTN_EN1 PB1 |
| #define BTN_EN2 PB2 |
| #define BTN_ENC PE7 |
1.8.16 
