Prusa MINI Firmware overview
Macros
pins_TEENSY31_32.h File Reference

Go to the source code of this file.

Macros

#define BOARD_INFO_NAME   "Teensy3.2"
 
#define AT90USB   1286
 
#define USBCON
 
#define X_STOP_PIN   3
 
#define Y_STOP_PIN   4
 
#define Z_STOP_PIN   5
 
#define X_STEP_PIN   5
 
#define X_DIR_PIN   6
 
#define X_ENABLE_PIN   2
 
#define Y_STEP_PIN   7
 
#define Y_DIR_PIN   8
 
#define Y_ENABLE_PIN   2
 
#define Z_STEP_PIN   9
 
#define Z_DIR_PIN   10
 
#define Z_ENABLE_PIN   2
 
#define E0_STEP_PIN   11
 
#define E0_DIR_PIN   12
 
#define E0_ENABLE_PIN   2
 
#define HEATER_0_PIN   20
 
#define HEATER_BED_PIN   21
 
#define FAN_PIN   22
 
#define TEMP_0_PIN   14
 
#define TEMP_BED_PIN   15
 
#define FILWIDTH_PIN   6
 
#define LED_PIN   13
 

Macro Definition Documentation

◆ BOARD_INFO_NAME

#define BOARD_INFO_NAME   "Teensy3.2"

Marlin 3D Printer Firmware Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]

Based on Sprinter and grbl. Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm

This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with this program. If not, see http://www.gnu.org/licenses/. Teensy 3.1 (MK20DX256) and Teensy 3.2 (MK20DX256) Breadboard pin assignments Requires the Teensyduino software with Teensy 3.1 or Teensy 3.2 selected in Arduino IDE! http://www.pjrc.com/teensy/teensyduino.html

◆ AT90USB

#define AT90USB   1286

◆ USBCON

#define USBCON

◆ X_STOP_PIN

#define X_STOP_PIN   3

◆ Y_STOP_PIN

#define Y_STOP_PIN   4

◆ Z_STOP_PIN

#define Z_STOP_PIN   5

◆ X_STEP_PIN

#define X_STEP_PIN   5

◆ X_DIR_PIN

#define X_DIR_PIN   6

◆ X_ENABLE_PIN

#define X_ENABLE_PIN   2

◆ Y_STEP_PIN

#define Y_STEP_PIN   7

◆ Y_DIR_PIN

#define Y_DIR_PIN   8

◆ Y_ENABLE_PIN

#define Y_ENABLE_PIN   2

◆ Z_STEP_PIN

#define Z_STEP_PIN   9

◆ Z_DIR_PIN

#define Z_DIR_PIN   10

◆ Z_ENABLE_PIN

#define Z_ENABLE_PIN   2

◆ E0_STEP_PIN

#define E0_STEP_PIN   11

◆ E0_DIR_PIN

#define E0_DIR_PIN   12

◆ E0_ENABLE_PIN

#define E0_ENABLE_PIN   2

◆ HEATER_0_PIN

#define HEATER_0_PIN   20

◆ HEATER_BED_PIN

#define HEATER_BED_PIN   21

◆ FAN_PIN

#define FAN_PIN   22

◆ TEMP_0_PIN

#define TEMP_0_PIN   14

◆ TEMP_BED_PIN

#define TEMP_BED_PIN   15

◆ FILWIDTH_PIN

#define FILWIDTH_PIN   6

◆ LED_PIN

#define LED_PIN   13