Prusa MINI Firmware overview
|
Go to the source code of this file.
#define BOARD_INFO_NAME "Black STM32F4VET6" |
Marlin 3D Printer Firmware Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
Based on Sprinter and grbl. Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program. If not, see http://www.gnu.org/licenses/. STM32F407VET6 with RAMPS-like shield 'Black' STM32F407VET6 board - http://wiki.stm32duino.com/index.php?title=STM32F407 Shield - https://github.com/jmz52/Hardware
#define DEFAULT_MACHINE_NAME "STM32F407VET6" |
#define SRAM_EEPROM_EMULATION |
#define SERVO0_PIN PC6 |
#define SERVO1_PIN PC7 |
#define X_MIN_PIN PC13 |
#define X_MAX_PIN PA15 |
#define Y_MIN_PIN PA5 |
#define Y_MAX_PIN PD12 |
#define Z_MIN_PIN PD14 |
#define Z_MAX_PIN PD15 |
#define X_STEP_PIN PC4 |
#define X_DIR_PIN PA4 |
#define X_ENABLE_PIN PE7 |
#define Y_STEP_PIN PE5 |
#define Y_DIR_PIN PE2 |
#define Y_ENABLE_PIN PE6 |
#define Z_STEP_PIN PD5 |
#define Z_DIR_PIN PD3 |
#define Z_ENABLE_PIN PD6 |
#define E0_STEP_PIN PD7 |
#define E0_DIR_PIN PD0 |
#define E0_ENABLE_PIN PB9 |
#define E1_STEP_PIN PE0 |
#define E1_DIR_PIN PE1 |
#define E1_ENABLE_PIN PB8 |
#define TEMP_0_PIN PC0 |
#define TEMP_1_PIN PC1 |
#define TEMP_BED_PIN PC2 |
#define TEMP_CHAMBER_PIN PC3 |
#define HEATER_0_PIN PA2 |
#define HEATER_1_PIN PA3 |
#define HEATER_BED_PIN PA1 |
#define FAN_PIN PE9 |
#define FAN1_PIN PE11 |
#define FAN2_PIN PE13 |
#define FAN3_PIN PE14 |
#define SDSS PB12 |
#define LED_PIN PA6 |
#define KILL_PIN PB1 |
#define SD_DETECT_PIN PC5 |
#define BEEPER_PIN PD10 |
#define LCD_PINS_RS PE15 |
#define LCD_PINS_ENABLE PD8 |
#define LCD_PINS_D4 PE10 |
#define LCD_PINS_D5 PE12 |
#define LCD_PINS_D6 PD1 |
#define LCD_PINS_D7 PE8 |
#define BTN_ENC PD9 |
#define BTN_EN1 PD4 |
#define BTN_EN2 PD13 |
#define DOGLCD_CS LCD_PINS_D5 |
#define DOGLCD_A0 LCD_PINS_D6 |