Prusa MINI Firmware overview
|
I2C Configuration Structure definition. More...
#include <stm32f4xx_hal_i2c.h>
Public Attributes | |
uint32_t | ClockSpeed |
uint32_t | DutyCycle |
uint32_t | OwnAddress1 |
uint32_t | AddressingMode |
uint32_t | DualAddressMode |
uint32_t | OwnAddress2 |
uint32_t | GeneralCallMode |
uint32_t | NoStretchMode |
I2C Configuration Structure definition.
uint32_t I2C_InitTypeDef::ClockSpeed |
Specifies the clock frequency. This parameter must be set to a value lower than 400kHz
uint32_t I2C_InitTypeDef::DutyCycle |
Specifies the I2C fast mode duty cycle. This parameter can be a value of I2C duty cycle in fast mode
uint32_t I2C_InitTypeDef::OwnAddress1 |
Specifies the first device own address. This parameter can be a 7-bit or 10-bit address.
uint32_t I2C_InitTypeDef::AddressingMode |
Specifies if 7-bit or 10-bit addressing mode is selected. This parameter can be a value of I2C addressing mode
uint32_t I2C_InitTypeDef::DualAddressMode |
Specifies if dual addressing mode is selected. This parameter can be a value of I2C dual addressing mode
uint32_t I2C_InitTypeDef::OwnAddress2 |
Specifies the second device own address if dual addressing mode is selected This parameter can be a 7-bit address.
uint32_t I2C_InitTypeDef::GeneralCallMode |
Specifies if general call mode is selected. This parameter can be a value of I2C general call addressing mode
uint32_t I2C_InitTypeDef::NoStretchMode |
Specifies if nostretch mode is selected. This parameter can be a value of I2C nostretch mode