Go to the source code of this file.
◆ BOARD_INFO_NAME
#define BOARD_INFO_NAME "BIGTREE SKR Mini E3" |
Marlin 3D Printer Firmware Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
Based on Sprinter and grbl. Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program. If not, see http://www.gnu.org/licenses/.
◆ DISABLE_JTAG
◆ STM32_FLASH_SIZE
#define STM32_FLASH_SIZE (256 * 1024) |
◆ FLASH_EEPROM_EMULATION
#define FLASH_EEPROM_EMULATION |
◆ EEPROM_PAGE_SIZE
#define EEPROM_PAGE_SIZE uint16(0x800) |
◆ EEPROM_START_ADDRESS
◆ E2END
◆ SERVO0_PIN
◆ X_STOP_PIN
◆ Y_STOP_PIN
◆ Z_STOP_PIN
◆ Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN PC14 |
◆ FIL_RUNOUT_PIN
#define FIL_RUNOUT_PIN PC15 |
◆ X_ENABLE_PIN
#define X_ENABLE_PIN PB14 |
◆ X_STEP_PIN
◆ X_DIR_PIN
◆ Y_ENABLE_PIN
#define Y_ENABLE_PIN PB11 |
◆ Y_STEP_PIN
◆ Y_DIR_PIN
◆ Z_ENABLE_PIN
◆ Z_STEP_PIN
◆ Z_DIR_PIN
◆ E0_ENABLE_PIN
#define E0_ENABLE_PIN PD2 |
◆ E0_STEP_PIN
◆ E0_DIR_PIN
◆ TEMP_0_PIN
◆ TEMP_BED_PIN
◆ HEATER_0_PIN
◆ HEATER_BED_PIN
#define HEATER_BED_PIN PC9 |
◆ FAN_PIN
◆ USB_CONNECT_PIN
#define USB_CONNECT_PIN PC13 |
◆ USB_CONNECT_INVERTING
#define USB_CONNECT_INVERTING false |
◆ SD_DETECT_PIN
#define SD_DETECT_PIN PC4 |
◆ HAS_ONBOARD_SD
_____
5V | · · | GND
(LCD_EN) PB7 | · · | PB8 (LCD_RS) (LCD_D4) PB9 | · · | PA10 (BTN_EN2) RESET | · · | PA9 (BTN_EN1)
(BTN_ENC) PB6 | · · | PB5 (BEEPER)
EXP1
◆ SDCARD_CONNECTION
#define SDCARD_CONNECTION ONBOARD |
◆ ON_BOARD_SPI_DEVICE
#define ON_BOARD_SPI_DEVICE 1 |
◆ ONBOARD_SD_CS_PIN
#define ONBOARD_SD_CS_PIN PA4 |