Macros
#define	BOARD_INFO_NAME "Gen7 Custom"

#define	X_STOP_PIN 0

#define	Y_STOP_PIN 1

#define	Z_STOP_PIN 2

#define	X_STEP_PIN 21

#define	X_DIR_PIN 20

#define	X_ENABLE_PIN 24

#define	Y_STEP_PIN 23

#define	Y_DIR_PIN 22

#define	Y_ENABLE_PIN 24

#define	Z_STEP_PIN 26

#define	Z_DIR_PIN 25

#define	Z_ENABLE_PIN 24

#define	E0_STEP_PIN 28

#define	E0_DIR_PIN 27

#define	E0_ENABLE_PIN 24

#define	TEMP_0_PIN 2

#define	TEMP_BED_PIN 1

#define	HEATER_0_PIN 4

#define	HEATER_BED_PIN 3

#define	SDSS 31

#define	PS_ON_PIN 19

#define	CASE_LIGHT_PIN 15

#define	DEBUG_PIN -1

#define	BEEPER_PIN -1

#define	LCD_PINS_RS 18

#define	LCD_PINS_ENABLE 17

#define	LCD_PINS_D4 16

#define	LCD_PINS_D5 15

#define	LCD_PINS_D6 13

#define	LCD_PINS_D7 14

#define	BTN_EN1 11

#define	BTN_EN2 10

#define	BTN_ENC 12

#define	SPINDLE_LASER_ENA_PIN 5

#define	SPINDLE_LASER_PWM_PIN 16

#define	SPINDLE_DIR_PIN 6

Macro Definition Documentation

◆ BOARD_INFO_NAME

#define BOARD_INFO_NAME "Gen7 Custom"

This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with this program. If not, see http://www.gnu.org/licenses/. Gen7 Alfons3 board pin assignments

These Pins are assigned for the modified GEN7 Board from Alfons3. Please review the pins and adjust them for your needs. Rev B 26 DEC 2016

1) added pointer to a current Arduino IDE extension 2) added support for M3, M4 & M5 spindle control commands 3) added case light pin definition A useable Arduino IDE extension (board manager) can be found at https://github.com/Lauszus/Sanguino

This extension has been tested on Arduino 1.6.12 & 1.8.0

Here's the JSON path: https://raw.githubusercontent.com/Lauszus/Sanguino/master/package_lauszus_sanguino_index.json

When installing select 1.0.2

Installation instructions can be found at https://learn.sparkfun.com/pages/CustomBoardsArduino Just use the above JSON URL instead of Sparkfun's JSON.

Once installed select the Sanguino board and then select the CPU.

◆ X_STOP_PIN

#define X_STOP_PIN 0

◆ Y_STOP_PIN

#define Y_STOP_PIN 1

◆ Z_STOP_PIN

#define Z_STOP_PIN 2

◆ X_STEP_PIN

#define X_STEP_PIN 21

◆ X_DIR_PIN

#define X_DIR_PIN 20

◆ X_ENABLE_PIN

#define X_ENABLE_PIN 24

◆ Y_STEP_PIN

#define Y_STEP_PIN 23

◆ Y_DIR_PIN

#define Y_DIR_PIN 22

◆ Y_ENABLE_PIN

#define Y_ENABLE_PIN 24

◆ Z_STEP_PIN

#define Z_STEP_PIN 26

◆ Z_DIR_PIN

#define Z_DIR_PIN 25

◆ Z_ENABLE_PIN

#define Z_ENABLE_PIN 24

◆ E0_STEP_PIN

#define E0_STEP_PIN 28

◆ E0_DIR_PIN

#define E0_DIR_PIN 27

◆ E0_ENABLE_PIN

#define E0_ENABLE_PIN 24

◆ TEMP_0_PIN

#define TEMP_0_PIN 2

◆ TEMP_BED_PIN

#define TEMP_BED_PIN 1

◆ HEATER_0_PIN

#define HEATER_0_PIN 4

◆ HEATER_BED_PIN

#define HEATER_BED_PIN 3

◆ SDSS

#define SDSS 31

◆ PS_ON_PIN

#define PS_ON_PIN 19

◆ CASE_LIGHT_PIN

#define CASE_LIGHT_PIN 15

◆ DEBUG_PIN

#define DEBUG_PIN -1

◆ BEEPER_PIN

#define BEEPER_PIN -1

◆ LCD_PINS_RS

#define LCD_PINS_RS 18

◆ LCD_PINS_ENABLE

#define LCD_PINS_ENABLE 17

◆ LCD_PINS_D4

#define LCD_PINS_D4 16

◆ LCD_PINS_D5

#define LCD_PINS_D5 15

◆ LCD_PINS_D6

#define LCD_PINS_D6 13

◆ LCD_PINS_D7

#define LCD_PINS_D7 14

◆ BTN_EN1

#define BTN_EN1 11

◆ BTN_EN2

#define BTN_EN2 10

◆ BTN_ENC

#define BTN_ENC 12

◆ SPINDLE_LASER_ENA_PIN

#define SPINDLE_LASER_ENA_PIN 5

◆ SPINDLE_LASER_PWM_PIN

#define SPINDLE_LASER_PWM_PIN 16

◆ SPINDLE_DIR_PIN

#define SPINDLE_DIR_PIN 6

Macros