stm32f4xx_hal_pwr_ex.h File Reference

Header file of PWR HAL Extension module. More...

#include "stm32f4xx_hal_def.h"

Go to the source code of this file.

Macros
#define	PWR_REGULATOR_VOLTAGE_SCALE1
#define	PWR_REGULATOR_VOLTAGE_SCALE2
#define	PWR_REGULATOR_VOLTAGE_SCALE3   PWR_CR_VOS_0 /* Scale 3 mode: the maximum value of fHCLK is 120 MHz. */
#define	__HAL_PWR_VOLTAGESCALING_CONFIG(__REGULATOR__)
	macros configure the main internal regulator output voltage. More...
#define	FPDS_BIT_NUMBER   PWR_CR_FPDS_Pos
#define	CR_FPDS_BB   (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (FPDS_BIT_NUMBER * 4U))
#define	ODEN_BIT_NUMBER   PWR_CR_ODEN_Pos
#define	CR_ODEN_BB   (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (ODEN_BIT_NUMBER * 4U))
#define	ODSWEN_BIT_NUMBER   PWR_CR_ODSWEN_Pos
#define	CR_ODSWEN_BB   (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (ODSWEN_BIT_NUMBER * 4U))
#define	MRLVDS_BIT_NUMBER   PWR_CR_MRLVDS_Pos
#define	CR_MRLVDS_BB   (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (MRLVDS_BIT_NUMBER * 4U))
#define	LPLVDS_BIT_NUMBER   PWR_CR_LPLVDS_Pos
#define	CR_LPLVDS_BB   (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (LPLVDS_BIT_NUMBER * 4U))
#define	BRE_BIT_NUMBER   PWR_CSR_BRE_Pos
#define	CSR_BRE_BB   (uint32_t)(PERIPH_BB_BASE + (PWR_CSR_OFFSET_BB * 32U) + (BRE_BIT_NUMBER * 4U))
#define	IS_PWR_VOLTAGE_SCALING_RANGE(VOLTAGE)
#define	IS_PWR_WAKEUP_PIN(PIN)   ((PIN) == PWR_WAKEUP_PIN1)

Functions
void	HAL_PWREx_EnableFlashPowerDown (void)
void	HAL_PWREx_DisableFlashPowerDown (void)
HAL_StatusTypeDef	HAL_PWREx_EnableBkUpReg (void)
HAL_StatusTypeDef	HAL_PWREx_DisableBkUpReg (void)
uint32_t	HAL_PWREx_GetVoltageRange (void)
HAL_StatusTypeDef	HAL_PWREx_ControlVoltageScaling (uint32_t VoltageScaling)

Detailed Description

Header file of PWR HAL Extension module.

Author

MCD Application Team

Attention

© COPYRIGHT(c) 2017 STMicroelectronics

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
3. Neither the name of STMicroelectronics nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.