Go to the source code of this file.
◆ BOARD_INFO_NAME
#define BOARD_INFO_NAME "BIGTREE SKR 1.3" |
Marlin 3D Printer Firmware Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
Based on Sprinter and grbl. Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program. If not, see http://www.gnu.org/licenses/.
◆ SERVO0_PIN
◆ X_MIN_PIN
◆ X_MAX_PIN
◆ Y_MIN_PIN
◆ Y_MAX_PIN
◆ Z_MIN_PIN
◆ Z_MAX_PIN
◆ Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN P1_24 |
◆ FIL_RUNOUT_PIN
#define FIL_RUNOUT_PIN P1_28 |
◆ X_STEP_PIN
◆ X_DIR_PIN
◆ X_ENABLE_PIN
#define X_ENABLE_PIN P2_01 |
◆ X_CS_PIN
◆ Y_STEP_PIN
◆ Y_DIR_PIN
◆ Y_ENABLE_PIN
#define Y_ENABLE_PIN P2_08 |
◆ Y_CS_PIN
◆ Z_STEP_PIN
◆ Z_DIR_PIN
◆ Z_ENABLE_PIN
#define Z_ENABLE_PIN P0_21 |
◆ Z_CS_PIN
◆ E0_STEP_PIN
#define E0_STEP_PIN P2_13 |
◆ E0_DIR_PIN
◆ E0_ENABLE_PIN
#define E0_ENABLE_PIN P2_12 |
◆ E0_CS_PIN
◆ E1_STEP_PIN
#define E1_STEP_PIN P0_01 |
◆ E1_DIR_PIN
◆ E1_ENABLE_PIN
#define E1_ENABLE_PIN P0_10 |
◆ E1_CS_PIN
◆ TEMP_BED_PIN
◆ TEMP_0_PIN
◆ TEMP_1_PIN
◆ HEATER_0_PIN
#define HEATER_0_PIN P2_07 |
◆ HEATER_1_PIN
#define HEATER_1_PIN P2_04 |
◆ FAN_PIN
◆ HEATER_BED_PIN
#define HEATER_BED_PIN P2_05 |
◆ SDCARD_CONNECTION
#define SDCARD_CONNECTION LCD |
_____ _____
NC | · · | GND 5V | · · | GND
RESET | · · | 1.31(SD_DETECT) (LCD_D7) 1.23 | · · | 1.22 (LCD_D6)
(MOSI)0.18 | · · | 3.25(BTN_EN2) (LCD_D5) 1.21 | · · | 1.20 (LCD_D4) (SD_SS)0.16 | · · | 3.26(BTN_EN1) (LCD_RS) 1.19 | · · | 1.18 (LCD_EN) (SCK)0.15 | · · | 0.17(MISO) (BTN_ENC) 0.28 | · · | 1.30 (BEEPER)
EXP2 EXP1
◆ ONBOARD_SD_CS_PIN
#define ONBOARD_SD_CS_PIN P0_06 |