Prusa MINI Firmware overview
|
Go to the source code of this file.
#define BOARD_INFO_NAME "BIGTREE SKR E3 DIP V1.0" |
Marlin 3D Printer Firmware Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
Based on Sprinter and grbl. Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program. If not, see http://www.gnu.org/licenses/.
#define DISABLE_JTAG |
#define STM32_FLASH_SIZE (256 * 1024) |
#define FLASH_EEPROM_EMULATION |
#define EEPROM_PAGE_SIZE uint16(0x800) |
#define EEPROM_START_ADDRESS uint32(0x8000000 + STM32_FLASH_SIZE - 2 * EEPROM_PAGE_SIZE) |
#define E2END (EEPROM_PAGE_SIZE - 1) |
#define SERVO0_PIN PA1 |
#define X_STOP_PIN PC1 |
#define Y_STOP_PIN PC0 |
#define Z_STOP_PIN PC15 |
#define Z_MIN_PROBE_PIN PC14 |
#define FIL_RUNOUT_PIN PC2 |
#define X_ENABLE_PIN PC7 |
#define X_STEP_PIN PC6 |
#define X_DIR_PIN PB15 |
#define X_CS_PIN PC10 |
#define Y_ENABLE_PIN PB14 |
#define Y_STEP_PIN PB13 |
#define Y_DIR_PIN PB12 |
#define Y_CS_PIN PC11 |
#define Z_ENABLE_PIN PB11 |
#define Z_STEP_PIN PB10 |
#define Z_DIR_PIN PB2 |
#define Z_CS_PIN PC12 |
#define E0_ENABLE_PIN PB1 |
#define E0_STEP_PIN PB0 |
#define E0_DIR_PIN PC5 |
#define E0_CS_PIN PD2 |
#define TEMP_0_PIN PA0 |
#define TEMP_BED_PIN PC3 |
#define HEATER_0_PIN PC8 |
#define HEATER_BED_PIN PC9 |
#define FAN_PIN PA8 |
#define USB_CONNECT_PIN PC13 |
#define USB_CONNECT_INVERTING false |
#define SD_DETECT_PIN PC4 |
#define HAS_ONBOARD_SD |
#define SDCARD_CONNECTION ONBOARD |
#define ON_BOARD_SPI_DEVICE 1 |
#define ONBOARD_SD_CS_PIN PA4 |