Macros
#define	BOARD_INFO_NAME "Final OMCA"

#define	X_STOP_PIN 0

#define	Y_STOP_PIN 1

#define	Z_STOP_PIN 2

#define	X_STEP_PIN 26

#define	X_DIR_PIN 25

#define	X_ENABLE_PIN 10

#define	Y_STEP_PIN 28

#define	Y_DIR_PIN 27

#define	Y_ENABLE_PIN 10

#define	Z_STEP_PIN 23

#define	Z_DIR_PIN 22

#define	Z_ENABLE_PIN 10

#define	E0_STEP_PIN 24

#define	E0_DIR_PIN 21

#define	E0_ENABLE_PIN 10

#define	E1_STEP_PIN -1

#define	E1_DIR_PIN -1

#define	E1_ENABLE_PIN -1

#define	E2_STEP_PIN -1

#define	E2_DIR_PIN -1

#define	E2_ENABLE_PIN -1

#define	TEMP_0_PIN 0

#define	TEMP_1_PIN 1

#define	TEMP_BED_PIN 2

#define	HEATER_0_PIN 3

#define	HEATER_BED_PIN 4

#define	FAN_PIN 14

#define	SDSS 11

#define	I2C_SCL_PIN 16

#define	I2C_SDA_PIN 17

#define	__FS 20

#define	__FD 19

#define	__GS 18

#define	__GD 13

#define	UNUSED_PWM 14

Macro Definition Documentation

◆ BOARD_INFO_NAME

#define BOARD_INFO_NAME "Final OMCA"

This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with this program. If not, see http://www.gnu.org/licenses/. Open Motion controller with enable based extruders (Final!)

                   ATmega644

                   +---\/---+
       (D 0) PB0  1|        |40  PA0 (AI 0 / D31)
       (D 1) PB1  2|        |39  PA1 (AI 1 / D30)
  INT2 (D 2) PB2  3|        |38  PA2 (AI 2 / D29)
   PWM (D 3) PB3  4|        |37  PA3 (AI 3 / D28)
   PWM (D 4) PB4  5|        |36  PA4 (AI 4 / D27)
  MOSI (D 5) PB5  6|        |35  PA5 (AI 5 / D26)
  MISO (D 6) PB6  7|        |34  PA6 (AI 6 / D25)
   SCK (D 7) PB7  8|        |33  PA7 (AI 7 / D24)
             RST  9|        |32  AREF
             VCC 10|        |31  GND
             GND 11|        |30  AVCC
           XTAL2 12|        |29  PC7 (D 23)
           XTAL1 13|        |28  PC6 (D 22)
  RX0 (D 8)  PD0 14|        |27  PC5 (D 21) TDI
  TX0 (D 9)  PD1 15|        |26  PC4 (D 20) TDO

REF http://sanguino.cc/hardware Rev B 26 DEC 2016

added pointer to a current Arduino IDE extension A useable Arduino IDE extension (board manager) can be found at https://github.com/Lauszus/Sanguino

This extension has been tested on Arduino 1.6.12 & 1.8.0

Here's the JSON path: https://raw.githubusercontent.com/Lauszus/Sanguino/master/package_lauszus_sanguino_index.json

When installing select 1.0.2

Installation instructions can be found at https://learn.sparkfun.com/pages/CustomBoardsArduino Just use the above JSON URL instead of Sparkfun's JSON.

Once installed select the Sanguino board and then select the CPU.

◆ X_STOP_PIN

#define X_STOP_PIN 0

◆ Y_STOP_PIN

#define Y_STOP_PIN 1

◆ Z_STOP_PIN

#define Z_STOP_PIN 2

◆ X_STEP_PIN

#define X_STEP_PIN 26

◆ X_DIR_PIN

#define X_DIR_PIN 25

◆ X_ENABLE_PIN

#define X_ENABLE_PIN 10

◆ Y_STEP_PIN

#define Y_STEP_PIN 28

◆ Y_DIR_PIN

#define Y_DIR_PIN 27

◆ Y_ENABLE_PIN

#define Y_ENABLE_PIN 10

◆ Z_STEP_PIN

#define Z_STEP_PIN 23

◆ Z_DIR_PIN

#define Z_DIR_PIN 22

◆ Z_ENABLE_PIN

#define Z_ENABLE_PIN 10

◆ E0_STEP_PIN

#define E0_STEP_PIN 24

◆ E0_DIR_PIN

#define E0_DIR_PIN 21

◆ E0_ENABLE_PIN

#define E0_ENABLE_PIN 10

◆ E1_STEP_PIN

#define E1_STEP_PIN -1

◆ E1_DIR_PIN

#define E1_DIR_PIN -1

◆ E1_ENABLE_PIN

#define E1_ENABLE_PIN -1

◆ E2_STEP_PIN

#define E2_STEP_PIN -1

◆ E2_DIR_PIN

#define E2_DIR_PIN -1

◆ E2_ENABLE_PIN

#define E2_ENABLE_PIN -1

◆ TEMP_0_PIN

#define TEMP_0_PIN 0

◆ TEMP_1_PIN

#define TEMP_1_PIN 1

◆ TEMP_BED_PIN

#define TEMP_BED_PIN 2

◆ HEATER_0_PIN

#define HEATER_0_PIN 3

◆ HEATER_BED_PIN

#define HEATER_BED_PIN 4

◆ FAN_PIN

#define FAN_PIN 14

◆ SDSS

#define SDSS 11

◆ I2C_SCL_PIN

#define I2C_SCL_PIN 16

◆ I2C_SDA_PIN

#define I2C_SDA_PIN 17

◆ __FS

#define __FS 20

◆ __FD

#define __FD 19

◆ __GS

#define __GS 18

◆ __GD

#define __GD 13

◆ UNUSED_PWM

#define UNUSED_PWM 14

Macros