Prusa MINI Firmware overview
|
Go to the source code of this file.
Macros | |
#define | BOARD_INFO_NAME "Minitronics v1.0/1.1" |
#define | X_MIN_PIN 5 |
#define | X_MAX_PIN 2 |
#define | Y_MIN_PIN 2 |
#define | Y_MAX_PIN 15 |
#define | Z_MIN_PIN 6 |
#define | Z_MAX_PIN -1 |
#define | X_STEP_PIN 48 |
#define | X_DIR_PIN 47 |
#define | X_ENABLE_PIN 49 |
#define | Y_STEP_PIN 39 |
#define | Y_DIR_PIN 40 |
#define | Y_ENABLE_PIN 38 |
#define | Z_STEP_PIN 42 |
#define | Z_DIR_PIN 43 |
#define | Z_ENABLE_PIN 41 |
#define | E0_STEP_PIN 45 |
#define | E0_DIR_PIN 44 |
#define | E0_ENABLE_PIN 27 |
#define | E1_STEP_PIN 36 |
#define | E1_DIR_PIN 35 |
#define | E1_ENABLE_PIN 37 |
#define | TEMP_0_PIN 7 |
#define | TEMP_1_PIN 6 |
#define | TEMP_BED_PIN 6 |
#define | HEATER_0_PIN 7 |
#define | HEATER_1_PIN 8 |
#define | HEATER_BED_PIN 3 |
#define | FAN_PIN 9 |
#define | SDSS 16 |
#define | LED_PIN 46 |
#define | BEEPER_PIN -1 |
#define | LCD_PINS_RS -1 |
#define | LCD_PINS_ENABLE -1 |
#define | BTN_EN1 -1 |
#define | BTN_EN2 -1 |
#define | BTN_ENC -1 |
#define | SD_DETECT_PIN -1 |
#define BOARD_INFO_NAME "Minitronics v1.0/1.1" |
Marlin 3D Printer Firmware Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
Based on Sprinter and grbl. Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program. If not, see http://www.gnu.org/licenses/. Minitronics v1.0/1.1 pin assignments Rev B 2 JAN 2017
Added pin definitions for M3, M4 & M5 spindle control commands
#define X_MIN_PIN 5 |
#define X_MAX_PIN 2 |
#define Y_MIN_PIN 2 |
#define Y_MAX_PIN 15 |
#define Z_MIN_PIN 6 |
#define Z_MAX_PIN -1 |
#define X_STEP_PIN 48 |
#define X_DIR_PIN 47 |
#define X_ENABLE_PIN 49 |
#define Y_STEP_PIN 39 |
#define Y_DIR_PIN 40 |
#define Y_ENABLE_PIN 38 |
#define Z_STEP_PIN 42 |
#define Z_DIR_PIN 43 |
#define Z_ENABLE_PIN 41 |
#define E0_STEP_PIN 45 |
#define E0_DIR_PIN 44 |
#define E0_ENABLE_PIN 27 |
#define E1_STEP_PIN 36 |
#define E1_DIR_PIN 35 |
#define E1_ENABLE_PIN 37 |
#define TEMP_0_PIN 7 |
#define TEMP_1_PIN 6 |
#define TEMP_BED_PIN 6 |
#define HEATER_0_PIN 7 |
#define HEATER_1_PIN 8 |
#define HEATER_BED_PIN 3 |
#define FAN_PIN 9 |
#define SDSS 16 |
#define LED_PIN 46 |
#define BEEPER_PIN -1 |
#define LCD_PINS_RS -1 |
#define LCD_PINS_ENABLE -1 |
#define BTN_EN1 -1 |
#define BTN_EN2 -1 |
#define BTN_ENC -1 |
#define SD_DETECT_PIN -1 |