Prusa MINI Firmware overview
|
Go to the source code of this file.
Macros | |
#define | BOARD_INFO_NAME "JGAurora A5S A1 board" |
#define | STM32_XL_DENSITY |
#define | X_STOP_PIN PC6 |
#define | Y_STOP_PIN PG8 |
#define | Z_STOP_PIN PG7 |
#define | X_STEP_PIN PD6 |
#define | X_DIR_PIN PD3 |
#define | X_ENABLE_PIN PG9 |
#define | Y_STEP_PIN PG12 |
#define | Y_DIR_PIN PG11 |
#define | Y_ENABLE_PIN PG13 |
#define | Z_STEP_PIN PG15 |
#define | Z_DIR_PIN PG14 |
#define | Z_ENABLE_PIN PB8 |
#define | E0_STEP_PIN PE2 |
#define | E0_DIR_PIN PB9 |
#define | E0_ENABLE_PIN PE3 |
#define | E1_STEP_PIN PE5 |
#define | E1_DIR_PIN PE4 |
#define | E1_ENABLE_PIN PE6 |
#define | TEMP_0_PIN PC2 |
#define | TEMP_BED_PIN PC1 |
#define | HEATER_0_PIN PA2 |
#define | HEATER_BED_PIN PA3 |
#define | FAN_PIN PA1 |
#define | FIL_RUNOUT_PIN PC7 |
#define | LCD_BACKLIGHT_PIN PF11 |
#define | FSMC_CS_PIN PD7 |
#define | FSMC_RS_PIN PG0 |
#define | LCD_USE_DMA_FSMC |
#define | FSMC_DMA_DEV DMA2 |
#define | FSMC_DMA_CHANNEL DMA_CH5 |
#define | SD_DETECT_PIN PF10 |
#define | BEEPER_PIN PC3 |
#define | LED_PIN PC13 |
#define BOARD_INFO_NAME "JGAurora A5S A1 board" |
Marlin 3D Printer Firmware Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
Based on Sprinter and grbl. Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program. If not, see http://www.gnu.org/licenses/. ╦╔═╗╔═╗┬ ┬┬─┐┌─┐┬─┐┌─┐╔═╗┌─┐┬─┐┬ ┬┌┬┐ ┌─┐┌─┐┌┬┐ ║║ ╦╠═╣│ │├┬┘│ │├┬┘├─┤╠╣ │ │├┬┘│ ││││ │ │ ││││ ╚╝╚═╝╩ ╩└─┘┴└─└─┘┴└─┴ ┴╚ └─┘┴└─└─┘┴ ┴o└─┘└─┘┴ ┴ Pin assignments for 32-bit JGAurora A5S & A1
#define STM32_XL_DENSITY |
#define X_STOP_PIN PC6 |
#define Y_STOP_PIN PG8 |
#define Z_STOP_PIN PG7 |
#define X_STEP_PIN PD6 |
#define X_DIR_PIN PD3 |
#define X_ENABLE_PIN PG9 |
#define Y_STEP_PIN PG12 |
#define Y_DIR_PIN PG11 |
#define Y_ENABLE_PIN PG13 |
#define Z_STEP_PIN PG15 |
#define Z_DIR_PIN PG14 |
#define Z_ENABLE_PIN PB8 |
#define E0_STEP_PIN PE2 |
#define E0_DIR_PIN PB9 |
#define E0_ENABLE_PIN PE3 |
#define E1_STEP_PIN PE5 |
#define E1_DIR_PIN PE4 |
#define E1_ENABLE_PIN PE6 |
#define TEMP_0_PIN PC2 |
#define TEMP_BED_PIN PC1 |
#define HEATER_0_PIN PA2 |
#define HEATER_BED_PIN PA3 |
#define FAN_PIN PA1 |
#define FIL_RUNOUT_PIN PC7 |
#define LCD_BACKLIGHT_PIN PF11 |
#define FSMC_CS_PIN PD7 |
#define FSMC_RS_PIN PG0 |
#define LCD_USE_DMA_FSMC |
#define FSMC_DMA_DEV DMA2 |
#define FSMC_DMA_CHANNEL DMA_CH5 |
#define SD_DETECT_PIN PF10 |
#define BEEPER_PIN PC3 |
#define LED_PIN PC13 |