Prusa MINI Firmware overview
stm32f4xx_hal_gpio.h File Reference

Header file of GPIO HAL module. More...

Go to the source code of this file.

Classes

struct  GPIO_InitTypeDef
 GPIO Init structure definition. More...
 

Macros

#define GPIO_PIN_0   ((uint16_t)0x0001) /* Pin 0 selected */
 
#define GPIO_PIN_1   ((uint16_t)0x0002) /* Pin 1 selected */
 
#define GPIO_PIN_2   ((uint16_t)0x0004) /* Pin 2 selected */
 
#define GPIO_PIN_3   ((uint16_t)0x0008) /* Pin 3 selected */
 
#define GPIO_PIN_4   ((uint16_t)0x0010) /* Pin 4 selected */
 
#define GPIO_PIN_5   ((uint16_t)0x0020) /* Pin 5 selected */
 
#define GPIO_PIN_6   ((uint16_t)0x0040) /* Pin 6 selected */
 
#define GPIO_PIN_7   ((uint16_t)0x0080) /* Pin 7 selected */
 
#define GPIO_PIN_8   ((uint16_t)0x0100) /* Pin 8 selected */
 
#define GPIO_PIN_9   ((uint16_t)0x0200) /* Pin 9 selected */
 
#define GPIO_PIN_10   ((uint16_t)0x0400) /* Pin 10 selected */
 
#define GPIO_PIN_11   ((uint16_t)0x0800) /* Pin 11 selected */
 
#define GPIO_PIN_12   ((uint16_t)0x1000) /* Pin 12 selected */
 
#define GPIO_PIN_13   ((uint16_t)0x2000) /* Pin 13 selected */
 
#define GPIO_PIN_14   ((uint16_t)0x4000) /* Pin 14 selected */
 
#define GPIO_PIN_15   ((uint16_t)0x8000) /* Pin 15 selected */
 
#define GPIO_PIN_All   ((uint16_t)0xFFFF) /* All pins selected */
 
#define GPIO_PIN_MASK   0x0000FFFFU /* PIN mask for assert test */
 
#define GPIO_MODE_INPUT   0x00000000U
 
#define GPIO_MODE_OUTPUT_PP   0x00000001U
 
#define GPIO_MODE_OUTPUT_OD   0x00000011U
 
#define GPIO_MODE_AF_PP   0x00000002U
 
#define GPIO_MODE_AF_OD   0x00000012U
 
#define GPIO_MODE_ANALOG   0x00000003U
 
#define GPIO_MODE_IT_RISING   0x10110000U
 
#define GPIO_MODE_IT_FALLING   0x10210000U
 
#define GPIO_MODE_IT_RISING_FALLING   0x10310000U
 
#define GPIO_MODE_EVT_RISING   0x10120000U
 
#define GPIO_MODE_EVT_FALLING   0x10220000U
 
#define GPIO_MODE_EVT_RISING_FALLING   0x10320000U
 
#define GPIO_SPEED_FREQ_LOW   0x00000000U
 
#define GPIO_SPEED_FREQ_MEDIUM   0x00000001U
 
#define GPIO_SPEED_FREQ_HIGH   0x00000002U
 
#define GPIO_SPEED_FREQ_VERY_HIGH   0x00000003U
 
#define GPIO_NOPULL   0x00000000U
 
#define GPIO_PULLUP   0x00000001U
 
#define GPIO_PULLDOWN   0x00000002U
 
#define __HAL_GPIO_EXTI_GET_FLAG(__EXTI_LINE__)   (EXTI->PR & (__EXTI_LINE__))
 Checks whether the specified EXTI line flag is set or not. More...
 
#define __HAL_GPIO_EXTI_CLEAR_FLAG(__EXTI_LINE__)   (EXTI->PR = (__EXTI_LINE__))
 Clears the EXTI's line pending flags. More...
 
#define __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__)   (EXTI->PR & (__EXTI_LINE__))
 Checks whether the specified EXTI line is asserted or not. More...
 
#define __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__)   (EXTI->PR = (__EXTI_LINE__))
 Clears the EXTI's line pending bits. More...
 
#define __HAL_GPIO_EXTI_GENERATE_SWIT(__EXTI_LINE__)   (EXTI->SWIER |= (__EXTI_LINE__))
 Generates a Software interrupt on selected EXTI line. More...
 
#define IS_GPIO_PIN_ACTION(ACTION)   (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET))
 
#define IS_GPIO_PIN(PIN)   ((((PIN) & GPIO_PIN_MASK ) != 0x00U) && (((PIN) & ~GPIO_PIN_MASK) == 0x00U))
 
#define IS_GPIO_MODE(MODE)
 
#define IS_GPIO_SPEED(SPEED)
 
#define IS_GPIO_PULL(PULL)
 

Enumerations

enum  GPIO_PinState { GPIO_PIN_RESET = 0, GPIO_PIN_SET }
 GPIO Bit SET and Bit RESET enumeration. More...
 

Functions

void HAL_GPIO_Init (GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init)
 
void HAL_GPIO_DeInit (GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin)
 
GPIO_PinState HAL_GPIO_ReadPin (GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin)
 
void HAL_GPIO_WritePin (GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState)
 
void HAL_GPIO_TogglePin (GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin)
 
HAL_StatusTypeDef HAL_GPIO_LockPin (GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin)
 
void HAL_GPIO_EXTI_IRQHandler (uint16_t GPIO_Pin)
 
void HAL_GPIO_EXTI_Callback (uint16_t GPIO_Pin)
 

Detailed Description

Header file of GPIO HAL module.

Author
MCD Application Team
Attention

© COPYRIGHT(c) 2017 STMicroelectronics

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

  1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
  2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
  3. Neither the name of STMicroelectronics nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.