FLASH HAL module driver. This file provides firmware functions to manage the following functionalities of the internal FLASH memory: More...

#include "stm32f4xx_hal.h"

Detailed Description

FLASH HAL module driver. This file provides firmware functions to manage the following functionalities of the internal FLASH memory:

Author

MCD Application Team

Program operations functions
Memory Control functions
Peripheral Errors functions

==============================================================================
                      ##### FLASH peripheral features #####
==============================================================================

[..] The Flash memory interface manages CPU AHB I-Code and D-Code accesses
     to the Flash memory. It implements the erase and program Flash memory operations
     and the read and write protection mechanisms.

[..] The Flash memory interface accelerates code execution with a system of instruction
     prefetch and cache lines.

[..] The FLASH main features are:
    (+) Flash memory read operations
    (+) Flash memory program/erase operations
    (+) Read / write protections
    (+) Prefetch on I-Code
    (+) 64 cache lines of 128 bits on I-Code
    (+) 8 cache lines of 128 bits on D-Code


                   ##### How to use this driver #####
==============================================================================
  [..]
    This driver provides functions and macros to configure and program the FLASH
    memory of all STM32F4xx devices.

    (#) FLASH Memory IO Programming functions:
         (++) Lock and Unlock the FLASH interface using HAL_FLASH_Unlock() and
              HAL_FLASH_Lock() functions
         (++) Program functions: byte, half word, word and double word
         (++) There Two modes of programming :
          (+++) Polling mode using HAL_FLASH_Program() function
          (+++) Interrupt mode using HAL_FLASH_Program_IT() function

    (#) Interrupts and flags management functions :
         (++) Handle FLASH interrupts by calling HAL_FLASH_IRQHandler()
         (++) Wait for last FLASH operation according to its status
         (++) Get error flag status by calling HAL_SetErrorCode()

  [..]
    In addition to these functions, this driver includes a set of macros allowing
    to handle the following operations:
     (+) Set the latency
     (+) Enable/Disable the prefetch buffer
     (+) Enable/Disable the Instruction cache and the Data cache
     (+) Reset the Instruction cache and the Data cache
     (+) Enable/Disable the FLASH interrupts
     (+) Monitor the FLASH flags status

Attention

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
Neither the name of STMicroelectronics nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Detailed Description

© COPYRIGHT(c) 2017 STMicroelectronics