Prusa MINI Firmware overview
|
Macros | |
#define | LWIP_DBG_MASK_LEVEL 0x03 |
#define | LWIP_DBG_LEVEL_OFF LWIP_DBG_LEVEL_ALL |
Debug level (LWIP_DBG_MIN_LEVEL) | |
#define | LWIP_DBG_LEVEL_ALL 0x00 |
#define | LWIP_DBG_LEVEL_WARNING 0x01 |
#define | LWIP_DBG_LEVEL_SERIOUS 0x02 |
#define | LWIP_DBG_LEVEL_SEVERE 0x03 |
Enable/disable debug messages completely (LWIP_DBG_TYPES_ON) | |
#define | LWIP_DBG_ON 0x80U |
#define | LWIP_DBG_OFF 0x00U |
Debug message types (LWIP_DBG_TYPES_ON) | |
#define | LWIP_DBG_TRACE 0x40U |
#define | LWIP_DBG_STATE 0x20U |
#define | LWIP_DBG_FRESH 0x10U |
#define | LWIP_DBG_HALT 0x08U |
#define LWIP_DBG_LEVEL_ALL 0x00 |
Debug level: ALL messages
#define LWIP_DBG_LEVEL_WARNING 0x01 |
Debug level: Warnings. bad checksums, dropped packets, ...
#define LWIP_DBG_LEVEL_SERIOUS 0x02 |
Debug level: Serious. memory allocation failures, ...
#define LWIP_DBG_LEVEL_SEVERE 0x03 |
Debug level: Severe
#define LWIP_DBG_MASK_LEVEL 0x03 |
#define LWIP_DBG_LEVEL_OFF LWIP_DBG_LEVEL_ALL |
#define LWIP_DBG_ON 0x80U |
flag for LWIP_DEBUGF to enable that debug message
#define LWIP_DBG_OFF 0x00U |
flag for LWIP_DEBUGF to disable that debug message
#define LWIP_DBG_TRACE 0x40U |
flag for LWIP_DEBUGF indicating a tracing message (to follow program flow)
#define LWIP_DBG_STATE 0x20U |
flag for LWIP_DEBUGF indicating a state debug message (to follow module states)
#define LWIP_DBG_FRESH 0x10U |
flag for LWIP_DEBUGF indicating newly added code, not thoroughly tested yet
#define LWIP_DBG_HALT 0x08U |
flag for LWIP_DEBUGF to halt after printing this debug message