Prusa MINI Firmware overview
|
Go to the source code of this file.
Macros | |
#define | BOARD_INFO_NAME "Ultratronics v1.0" |
#define | X_MIN_PIN 31 |
#define | X_MAX_PIN 30 |
#define | Y_MIN_PIN 12 |
#define | Y_MAX_PIN 11 |
#define | Z_MIN_PIN 29 |
#define | Z_MAX_PIN 28 |
#define | X_STEP_PIN 35 |
#define | X_DIR_PIN 34 |
#define | X_ENABLE_PIN 37 |
#define | X_CS_PIN 18 |
#define | Y_STEP_PIN 22 |
#define | Y_DIR_PIN 23 |
#define | Y_ENABLE_PIN 33 |
#define | Y_CS_PIN 19 |
#define | Z_STEP_PIN 25 |
#define | Z_DIR_PIN 26 |
#define | Z_ENABLE_PIN 24 |
#define | Z_CS_PIN 16 |
#define | E0_STEP_PIN 47 |
#define | E0_DIR_PIN 46 |
#define | E0_ENABLE_PIN 48 |
#define | E0_CS_PIN 17 |
#define | E1_STEP_PIN 44 |
#define | E1_DIR_PIN 36 |
#define | E1_ENABLE_PIN 45 |
#define | E1_CS_PIN -1 |
#define | E2_STEP_PIN 42 |
#define | E2_DIR_PIN 41 |
#define | E2_ENABLE_PIN 43 |
#define | E2_CS_PIN -1 |
#define | E3_STEP_PIN 39 |
#define | E3_DIR_PIN 38 |
#define | E3_ENABLE_PIN 40 |
#define | E3_CS_PIN -1 |
#define | TEMP_0_PIN 0 |
#define | TEMP_1_PIN 2 |
#define | TEMP_2_PIN 3 |
#define | TEMP_3_PIN 4 |
#define | TEMP_BED_PIN 1 |
#define | HEATER_0_PIN 3 |
#define | HEATER_1_PIN 8 |
#define | HEATER_2_PIN 7 |
#define | HEATER_3_PIN 9 |
#define | HEATER_BED_PIN 2 |
#define | FAN_PIN 6 |
#define | FAN2_PIN 5 |
#define | SDSS 59 |
#define | SD_DETECT_PIN 60 |
#define | LED_PIN 13 |
#define | PS_ON_PIN 32 |
#define | DAC0_SYNC 53 |
#define | SPI_CHAN_DAC 1 |
#define | SPI_CHAN_EEPROM1 -1 |
#define | SPI_EEPROM1_CS -1 |
#define | SPI_EEPROM2_CS -1 |
#define | SPI_FLASH_CS -1 |
#define | MAX6675_SS_PIN 65 |
#define | MAX31855_SS0 65 |
#define | MAX31855_SS1 52 |
#define | MAX31855_SS2 50 |
#define | MAX31855_SS3 51 |
#define | ENC424_SS 61 |
#define | BEEPER_PIN 27 |
#define BOARD_INFO_NAME "Ultratronics v1.0" |
Marlin 3D Printer Firmware Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
Based on Sprinter and grbl. Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program. If not, see http://www.gnu.org/licenses/. ReprapWorld ULTRATRONICS v1.0
#define X_MIN_PIN 31 |
#define X_MAX_PIN 30 |
#define Y_MIN_PIN 12 |
#define Y_MAX_PIN 11 |
#define Z_MIN_PIN 29 |
#define Z_MAX_PIN 28 |
#define X_STEP_PIN 35 |
#define X_DIR_PIN 34 |
#define X_ENABLE_PIN 37 |
#define X_CS_PIN 18 |
#define Y_STEP_PIN 22 |
#define Y_DIR_PIN 23 |
#define Y_ENABLE_PIN 33 |
#define Y_CS_PIN 19 |
#define Z_STEP_PIN 25 |
#define Z_DIR_PIN 26 |
#define Z_ENABLE_PIN 24 |
#define Z_CS_PIN 16 |
#define E0_STEP_PIN 47 |
#define E0_DIR_PIN 46 |
#define E0_ENABLE_PIN 48 |
#define E0_CS_PIN 17 |
#define E1_STEP_PIN 44 |
#define E1_DIR_PIN 36 |
#define E1_ENABLE_PIN 45 |
#define E1_CS_PIN -1 |
#define E2_STEP_PIN 42 |
#define E2_DIR_PIN 41 |
#define E2_ENABLE_PIN 43 |
#define E2_CS_PIN -1 |
#define E3_STEP_PIN 39 |
#define E3_DIR_PIN 38 |
#define E3_ENABLE_PIN 40 |
#define E3_CS_PIN -1 |
#define TEMP_0_PIN 0 |
#define TEMP_1_PIN 2 |
#define TEMP_2_PIN 3 |
#define TEMP_3_PIN 4 |
#define TEMP_BED_PIN 1 |
#define HEATER_0_PIN 3 |
#define HEATER_1_PIN 8 |
#define HEATER_2_PIN 7 |
#define HEATER_3_PIN 9 |
#define HEATER_BED_PIN 2 |
#define FAN_PIN 6 |
#define FAN2_PIN 5 |
#define SDSS 59 |
#define SD_DETECT_PIN 60 |
#define LED_PIN 13 |
#define PS_ON_PIN 32 |
#define DAC0_SYNC 53 |
#define SPI_CHAN_DAC 1 |
#define SPI_CHAN_EEPROM1 -1 |
#define SPI_EEPROM1_CS -1 |
#define SPI_EEPROM2_CS -1 |
#define SPI_FLASH_CS -1 |
#define MAX6675_SS_PIN 65 |
#define MAX31855_SS0 65 |
#define MAX31855_SS1 52 |
#define MAX31855_SS2 50 |
#define MAX31855_SS3 51 |
#define ENC424_SS 61 |
#define BEEPER_PIN 27 |