Macros
#define	BOARD_INFO_NAME "Printrboard"

#define	DISABLE_JTAG

#define	X_STOP_PIN 47

#define	Y_STOP_PIN 20

#define	Z_STOP_PIN 36

#define	X_STEP_PIN 28

#define	X_DIR_PIN 29

#define	X_ENABLE_PIN 19

#define	Y_STEP_PIN 30

#define	Y_DIR_PIN 31

#define	Y_ENABLE_PIN 18

#define	Z_STEP_PIN 32

#define	Z_DIR_PIN 33

#define	Z_ENABLE_PIN 17

#define	E0_STEP_PIN 34

#define	E0_DIR_PIN 35

#define	E0_ENABLE_PIN 13

#define	TEMP_0_PIN 1

#define	TEMP_BED_PIN 0

#define	HEATER_0_PIN 15

#define	HEATER_1_PIN 44

#define	HEATER_2_PIN 45

#define	HEATER_BED_PIN 14

#define	FAN_PIN 16

#define	SDSS 26

#define	FILWIDTH_PIN 2

Macro Definition Documentation

◆ BOARD_INFO_NAME

#define BOARD_INFO_NAME "Printrboard"

This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with this program. If not, see http://www.gnu.org/licenses/. Rev B 2 JUN 2017

Converted to Arduino pin numbering There are two Arduino IDE extensions that are compatible with this board and with the mainstream Marlin software.

Teensyduino - http://www.pjrc.com/teensy/teensyduino.html Select Teensy++ 2.0 in Arduino IDE from the 'Tools > Board' menu

Installation instructions are at the above URL. Don't bother loading the libraries - they are not used with the Marlin software.

Printrboard - https://github.com/scwimbush/Printrboard-HID-Arduino-IDE-Support

Installation:

Go to the above URL, click on the "Clone or Download" button and then click on "Download ZIP" button.
Unzip the file, find the "printrboard" directory and then copy it to the hardware directory in Arduino. The Arduino hardware directory will probably be located in a path similar to this: C:\Program Files (x86)\Arduino\hardware.
Restart Arduino.
Select "Printrboard" from the 'Tools > Board' menu.

Teensyduino is the most popular option. Printrboard is used if your board doesn't have the Teensyduino bootloader on it. To burn the bootloader that comes with Printrboard:

Connect your programmer to the board.
In the Arduino IDE select "Printrboard" and then select the programmer.
In the Arduino IDE click on "burn bootloader". Don't worry about the "verify failed at 1F000" error message.
The programmer is no longer needed. Remove it.

◆ DISABLE_JTAG

#define DISABLE_JTAG

◆ X_STOP_PIN

#define X_STOP_PIN 47

◆ Y_STOP_PIN

#define Y_STOP_PIN 20

◆ Z_STOP_PIN

#define Z_STOP_PIN 36

◆ X_STEP_PIN

#define X_STEP_PIN 28

◆ X_DIR_PIN

#define X_DIR_PIN 29

◆ X_ENABLE_PIN

#define X_ENABLE_PIN 19

◆ Y_STEP_PIN

#define Y_STEP_PIN 30

◆ Y_DIR_PIN

#define Y_DIR_PIN 31

◆ Y_ENABLE_PIN

#define Y_ENABLE_PIN 18

◆ Z_STEP_PIN

#define Z_STEP_PIN 32

◆ Z_DIR_PIN

#define Z_DIR_PIN 33

◆ Z_ENABLE_PIN

#define Z_ENABLE_PIN 17

◆ E0_STEP_PIN

#define E0_STEP_PIN 34

◆ E0_DIR_PIN

#define E0_DIR_PIN 35

◆ E0_ENABLE_PIN

#define E0_ENABLE_PIN 13

◆ TEMP_0_PIN

#define TEMP_0_PIN 1

◆ TEMP_BED_PIN

#define TEMP_BED_PIN 0

◆ HEATER_0_PIN

#define HEATER_0_PIN 15

◆ HEATER_1_PIN

#define HEATER_1_PIN 44

◆ HEATER_2_PIN

#define HEATER_2_PIN 45

◆ HEATER_BED_PIN

#define HEATER_BED_PIN 14

◆ FAN_PIN

#define FAN_PIN 16

◆ SDSS

#define SDSS 26

◆ FILWIDTH_PIN

#define FILWIDTH_PIN 2

Macros