Go to the source code of this file.
◆ BOARD_INFO_NAME
#define BOARD_INFO_NAME "Azteeg X5 MINI" |
Marlin 3D Printer Firmware Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
Based on Sprinter and grbl. Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program. If not, see http://www.gnu.org/licenses/. Azteeg X5 MINI pin assignments
◆ BOARD_WEBSITE_URL
#define BOARD_WEBSITE_URL "tiny.cc/x5_mini" |
◆ LED_PIN
◆ SERVO0_PIN
◆ X_STOP_PIN
◆ Y_STOP_PIN
◆ Z_STOP_PIN
◆ FIL_RUNOUT_PIN
#define FIL_RUNOUT_PIN P2_04 |
◆ FILWIDTH_PIN
◆ X_STEP_PIN
◆ X_DIR_PIN
◆ X_ENABLE_PIN
#define X_ENABLE_PIN P0_10 |
◆ Y_STEP_PIN
◆ Y_DIR_PIN
◆ Y_ENABLE_PIN
#define Y_ENABLE_PIN P0_19 |
◆ Z_STEP_PIN
◆ Z_DIR_PIN
◆ Z_ENABLE_PIN
#define Z_ENABLE_PIN P0_21 |
◆ E0_STEP_PIN
#define E0_STEP_PIN P2_00 |
◆ E0_DIR_PIN
◆ E0_ENABLE_PIN
#define E0_ENABLE_PIN P0_04 |
◆ DIGIPOT_I2C_ADDRESS_A
#define DIGIPOT_I2C_ADDRESS_A 0x2C |
◆ DIGIPOT_I2C_ADDRESS_B
#define DIGIPOT_I2C_ADDRESS_B 0x2E |
◆ TEMP_BED_PIN
◆ TEMP_0_PIN
◆ HEATER_BED_PIN
#define HEATER_BED_PIN P2_07 |
◆ HEATER_0_PIN
#define HEATER_0_PIN P2_05 |
◆ FAN_PIN
◆ FAN1_PIN
◆ SDCARD_CONNECTION
#define SDCARD_CONNECTION ONBOARD |
◆ ONBOARD_SD_CS_PIN
#define ONBOARD_SD_CS_PIN P0_06 |