Macros
#define	BOARD_INFO_NAME "Misc. STM32F1R"

#define	DEFAULT_MACHINE_NAME "STM32F103RET6"

#define	X_STOP_PIN PB3

#define	Y_STOP_PIN PB4

#define	Z_STOP_PIN PB5

#define	X_STEP_PIN PC0

#define	X_DIR_PIN PC1

#define	X_ENABLE_PIN PA8

#define	Y_STEP_PIN PC2

#define	Y_DIR_PIN PC3

#define	Y_ENABLE_PIN PA8

#define	Z_STEP_PIN PC4

#define	Z_DIR_PIN PC5

#define	Z_ENABLE_PIN PA8

#define	E0_STEP_PIN PC6

#define	E0_DIR_PIN PC7

#define	E0_ENABLE_PIN PA8

#define	E1_STEP_PIN PC8

#define	E1_DIR_PIN PC9

#define	E1_ENABLE_PIN PA8

#define	E2_STEP_PIN PC10

#define	E2_DIR_PIN PC11

#define	E2_ENABLE_PIN PA8

#define	SDSS PA4

#define	LED_PIN PD2

#define	HEATER_0_PIN PB0

#define	HEATER_1_PIN PB1

#define	HEATER_BED_PIN PA3

#define	TEMP_BED_PIN PA0

#define	TEMP_0_PIN PA1

#define	TEMP_1_PIN PA2

Macro Definition Documentation

◆ BOARD_INFO_NAME

#define BOARD_INFO_NAME "Misc. STM32F1R"

This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with this program. If not, see http://www.gnu.org/licenses/. 21017 Victor Perez Marlin for stm32f1 test

◆ DEFAULT_MACHINE_NAME

#define DEFAULT_MACHINE_NAME "STM32F103RET6"

◆ X_STOP_PIN

#define X_STOP_PIN PB3

◆ Y_STOP_PIN

#define Y_STOP_PIN PB4

◆ Z_STOP_PIN

#define Z_STOP_PIN PB5

◆ X_STEP_PIN

#define X_STEP_PIN PC0

◆ X_DIR_PIN

#define X_DIR_PIN PC1

◆ X_ENABLE_PIN

#define X_ENABLE_PIN PA8

◆ Y_STEP_PIN

#define Y_STEP_PIN PC2

◆ Y_DIR_PIN

#define Y_DIR_PIN PC3

◆ Y_ENABLE_PIN

#define Y_ENABLE_PIN PA8

◆ Z_STEP_PIN

#define Z_STEP_PIN PC4

◆ Z_DIR_PIN

#define Z_DIR_PIN PC5

◆ Z_ENABLE_PIN

#define Z_ENABLE_PIN PA8

◆ E0_STEP_PIN

#define E0_STEP_PIN PC6

◆ E0_DIR_PIN

#define E0_DIR_PIN PC7

◆ E0_ENABLE_PIN

#define E0_ENABLE_PIN PA8

◆ E1_STEP_PIN

#define E1_STEP_PIN PC8

TODO: Currently using same Enable pin to all steppers.

◆ E1_DIR_PIN

#define E1_DIR_PIN PC9

◆ E1_ENABLE_PIN

#define E1_ENABLE_PIN PA8

◆ E2_STEP_PIN

#define E2_STEP_PIN PC10

◆ E2_DIR_PIN

#define E2_DIR_PIN PC11

◆ E2_ENABLE_PIN

#define E2_ENABLE_PIN PA8

◆ SDSS

#define SDSS PA4

◆ LED_PIN

#define LED_PIN PD2

◆ HEATER_0_PIN

#define HEATER_0_PIN PB0

◆ HEATER_1_PIN

#define HEATER_1_PIN PB1

◆ HEATER_BED_PIN

#define HEATER_BED_PIN PA3

◆ TEMP_BED_PIN

#define TEMP_BED_PIN PA0

◆ TEMP_0_PIN

#define TEMP_0_PIN PA1

◆ TEMP_1_PIN

#define TEMP_1_PIN PA2

Macros