Prusa MINI Firmware overview
Version.h
Go to the documentation of this file.
1 /**
2  * Marlin 3D Printer Firmware
3  * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
4  *
5  * Based on Sprinter and grbl.
6  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
7  *
8  * This program is free software: you can redistribute it and/or modify
9  * it under the terms of the GNU General Public License as published by
10  * the Free Software Foundation, either version 3 of the License, or
11  * (at your option) any later version.
12  *
13  * This program is distributed in the hope that it will be useful,
14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16  * GNU General Public License for more details.
17  *
18  * You should have received a copy of the GNU General Public License
19  * along with this program. If not, see <http://www.gnu.org/licenses/>.
20  *
21  */
22 #pragma once
23 
24 ////////////////////////////
25 // VENDOR VERSION EXAMPLE //
26 ////////////////////////////
27 
28 /**
29  * Marlin release version identifier
30  */
31 //#define SHORT_BUILD_VERSION "bugfix-2.0.x"
32 
33 /**
34  * Verbose version identifier which should contain a reference to the location
35  * from where the binary was downloaded or the source code was compiled.
36  */
37 //#define DETAILED_BUILD_VERSION SHORT_BUILD_VERSION " (Github)"
38 
39 /**
40  * The STRING_DISTRIBUTION_DATE represents when the binary file was built,
41  * here we define this default string as the date where the latest release
42  * version was tagged.
43  */
44 //#define STRING_DISTRIBUTION_DATE "2019-07-10"
45 
46 /**
47  * Defines a generic printer name to be output to the LCD after booting Marlin.
48  */
49 //#define MACHINE_NAME "3D Printer"
50 
51 /**
52  * The SOURCE_CODE_URL is the location where users will find the Marlin Source
53  * Code which is installed on the device. In most cases —unless the manufacturer
54  * has a distinct Github fork— the Source Code URL should just be the main
55  * Marlin repository.
56  */
57 //#define SOURCE_CODE_URL "https://github.com/MarlinFirmware/Marlin"
58 
59 /**
60  * Default generic printer UUID.
61  */
62 //#define DEFAULT_MACHINE_UUID "cede2a2f-41a2-4748-9b12-c55c62f367ff"
63 
64 /**
65  * The WEBSITE_URL is the location where users can get more information such as
66  * documentation about a specific Marlin release.
67  */
68 //#define WEBSITE_URL "http://marlinfw.org"
69 
70 /**
71  * Set the vendor info the serial USB interface, if changable
72  * Currently only supported by DUE platform
73  */
74 //#define USB_DEVICE_VENDOR_ID 0x0000
75 //#define USB_DEVICE_PRODUCT_ID 0x0000
76 //#define USB_DEVICE_MANUFACTURE_NAME WEBSITE_URL