Prusa MINI Firmware overview
pins_GEN6_DELUXE.h
Go to the documentation of this file.
1 /**
2  * Marlin 3D Printer Firmware
3  * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
4  *
5  * Based on Sprinter and grbl.
6  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
7  *
8  * This program is free software: you can redistribute it and/or modify
9  * it under the terms of the GNU General Public License as published by
10  * the Free Software Foundation, either version 3 of the License, or
11  * (at your option) any later version.
12  *
13  * This program is distributed in the hope that it will be useful,
14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16  * GNU General Public License for more details.
17  *
18  * You should have received a copy of the GNU General Public License
19  * along with this program. If not, see <http://www.gnu.org/licenses/>.
20  *
21  */
22 #pragma once
23 
24 /**
25  * Gen6 Deluxe pin assignments
26  */
27 
28 /**
29  * Rev B 26 DEC 2016
30  *
31  * added pointer to a current Arduino IDE extension
32  *
33  */
34 
35 /**
36  * A useable Arduino IDE extension (board manager) can be found at
37  * https://github.com/Lauszus/Sanguino
38  *
39  * This extension has been tested on Arduino 1.6.12 & 1.8.0
40  *
41  * Here's the JSON path:
42  * https://raw.githubusercontent.com/Lauszus/Sanguino/master/package_lauszus_sanguino_index.json
43  *
44  * When installing select 1.0.2
45  *
46  * Installation instructions can be found at https://learn.sparkfun.com/pages/CustomBoardsArduino
47  * Just use the above JSON URL instead of Sparkfun's JSON.
48  *
49  * Once installed select the SANGUINO board and then select the CPU.
50  *
51  */
52 
53 
54 #define BOARD_INFO_NAME "Gen6 Deluxe"
55 
56 #include "pins_GEN6.h"
pins_GEN6.h