Prusa MINI Firmware overview
fanmux.h
Go to the documentation of this file.
1 /**
2  * Marlin 3D Printer Firmware
3  * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
4  *
5  * Based on Sprinter and grbl.
6  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
7  *
8  * This program is free software: you can redistribute it and/or modify
9  * it under the terms of the GNU General Public License as published by
10  * the Free Software Foundation, either version 3 of the License, or
11  * (at your option) any later version.
12  *
13  * This program is distributed in the hope that it will be useful,
14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16  * GNU General Public License for more details.
17  *
18  * You should have received a copy of the GNU General Public License
19  * along with this program. If not, see <http://www.gnu.org/licenses/>.
20  *
21  */
22 #pragma once
23 
24 /**
25  * feature/fanmux.h - Cooling Fan Multiplexer support functions
26  */
27 
28 extern void fanmux_switch(const uint8_t e);
29 extern void fanmux_init();
fanmux.h
FANMUX1_PIN
#define FANMUX1_PIN
Definition: Configuration_A3ides_2209_MINI_adv.h:303
LOW
#define LOW
Definition: wiring_constants.h:70
FANMUX2_PIN
#define FANMUX2_PIN
Definition: Configuration_A3ides_2209_MINI_adv.h:304
FANMUX0_PIN
#define FANMUX0_PIN
Definition: Configuration_A3ides_2209_MINI_adv.h:302
SET_OUTPUT
#define SET_OUTPUT(IO)
Definition: fastio.h:101
fanmux_init
void fanmux_init()
WRITE
#define WRITE(IO, V)
Definition: fastio.h:96
uint8_t
const uint8_t[]
Definition: 404_html.c:3
HIGH
#define HIGH
Definition: wiring_constants.h:71
TEST
#define TEST(n, b)
Definition: macros.h:81
fanmux_switch
void fanmux_switch(const uint8_t e)