|
|
char | version [4] |
| |
|
float | axis_steps_per_mm [4] |
| |
|
float | max_feedrate_normal [4] |
| |
|
uint32_t | max_acceleration_mm_per_s2_normal [4] |
| |
|
float | acceleration |
| | Normal acceleration mm/s^2 THIS IS THE DEFAULT ACCELERATION for all moves. M204 SXXXX.
|
| |
|
float | retract_acceleration |
| | mm/s^2 filament pull-pack and push-forward while standing still in the other axis M204 TXXXX
|
| |
|
float | minimumfeedrate |
| |
|
float | mintravelfeedrate |
| |
|
uint32_t | min_segment_time_us |
| | (µs) M205 B
|
| |
|
float | max_jerk [4] |
| | Jerk is a maximum immediate velocity change.
|
| |
|
float | add_homing [3] |
| |
|
float | zprobe_zoffset |
| | Only used with define ENABLE_AUTO_BED_LEVELING.
|
| |
|
float | Kp |
| |
|
float | Ki |
| |
|
float | Kd |
| |
|
float | bedKp |
| |
|
float | bedKi |
| |
|
float | bedKd |
| |
|
int | lcd_contrast |
| | unused
|
| |
|
bool | autoretract_enabled |
| |
|
float | retract_length |
| |
|
float | retract_feedrate |
| |
|
float | retract_zlift |
| |
|
float | retract_recover_length |
| |
|
float | retract_recover_feedrate |
| |
|
bool | volumetric_enabled |
| |
|
float | filament_size [1] |
| | cross-sectional area of filament (in millimeters), typically around 1.75 or 2.85, 0 disables the volumetric calculations for the extruder.
|
| |
|
float | max_feedrate_silent [4] |
| | max speeds for silent mode
|
| |
|
uint32_t | max_acceleration_mm_per_s2_silent [4] |
| |
|
unsigned char | axis_ustep_resolution [4] |
| |
|
float | travel_acceleration |
| | travel acceleration mm/s^2
|
| |
|
float | mm_per_arc_segment |
| |
|
float | min_mm_per_arc_segment |
| |
|
uint8_t | n_arc_correction |
| |
|
uint16_t | min_arc_segments |
| |
|
uint16_t | arc_segments_per_sec |
| |
The documentation for this struct was generated from the following file:
