|
|
static void | MMU2::planner_line_to_current_position (float feedRate_mm_s) |
| |
|
static void | MMU2::planner_line_to_current_position_sync (float feedRate_mm_s) |
| |
|
void | MMU2::extruder_move (float distance, float feed_rate) |
| |
|
float | MMU2::move_raise_z (float delta) |
| |
|
void | MMU2::planner_abort_queued_moves () |
| |
|
void | MMU2::planner_synchronize () |
| |
|
bool | MMU2::planner_any_moves () |
| |
|
float | MMU2::planner_get_machine_position_E_mm () |
| |
|
float | MMU2::stepper_get_machine_position_E_mm () |
| |
|
float | MMU2::planner_get_current_position_E () |
| |
|
void | MMU2::planner_set_current_position_E (float e) |
| |
|
pos3d | MMU2::planner_current_position () |
| |
|
void | MMU2::motion_do_blocking_move_to_xy (float rx, float ry, float feedRate_mm_s) |
| |
|
void | MMU2::motion_do_blocking_move_to_z (float z, float feedRate_mm_s) |
| |
|
void | MMU2::nozzle_park () |
| |
|
bool | MMU2::marlin_printingIsActive () |
| |
|
void | MMU2::marlin_manage_heater () |
| |
|
void | MMU2::marlin_manage_inactivity (bool b) |
| |
|
void | MMU2::marlin_idle (bool b) |
| |
|
void | MMU2::marlin_refresh_print_state_in_ram () |
| |
|
void | MMU2::marlin_clear_print_state_in_ram () |
| |
|
void | MMU2::marlin_stop_and_save_print_to_ram () |
| |
|
int16_t | MMU2::thermal_degTargetHotend () |
| |
|
int16_t | MMU2::thermal_degHotend () |
| |
|
void | MMU2::thermal_setExtrudeMintemp (int16_t t) |
| |
|
void | MMU2::thermal_setTargetHotend (int16_t t) |
| |
|
void | MMU2::safe_delay_keep_alive (uint16_t t) |
| |
|
void | MMU2::Enable_E0 () |
| |
|
void | MMU2::Disable_E0 () |
| |
|
bool | MMU2::all_axes_homed () |
| |
MK3 / Marlin1 implementation of support routines for the MMU2
